Do you have a question about the Rockford Fosgate RFC10HB and is the answer not in the manual?
Brand | Rockford Fosgate |
---|---|
Model | RFC10HB |
Category | Music Equipment |
Language | English |
Explains applications like battery and audio system enhancement.
Details power density and charge/discharge speed advantages over batteries.
Highlights ultra-dense, porous electrodes and high voltage per cell.
Explains the meaning of WARNING and CAUTION symbols used in the manual.
Lists essential 'DO NOT' actions to prevent injury and damage during installation and use.
Discusses superior energy/power per weight/volume compared to EDLCs.
Notes over 500,000 cycles and minimal degradation of performance.
Mentions minimal loss of capacitance/ESR at low temperatures.
Covers LED display for voltage and warning buzzer for reverse polarity.
Describes the vent that ruptures under high internal pressure to release gas.
Pre-planning system layout and wiring routes for efficient installation.
Guidance on selecting a dry, ventilated location protected from water and heat.
Instructions on routing wires, using quality connectors, and proper grounding.
Details attaching ground and fused power wires to capacitor terminals.
Explains using 1/0 AWG and/or 4 AWG connections for amplifiers.
Explains equalizing battery and capacitor voltage to prevent arcing.
Emphasizes correct polarity and using a fuse for protection.
Describes connecting wires to charge card and LED indicators for charging status.
Provides steps to safely discharge the capacitor before servicing.
Explains the blue LED display showing system voltage.
Lists model RFC10HB and rated capacitance of 10 Farad.
Details capacitance tolerance, rated/surge voltage, and internal resistance (ESR).
Covers operating/storage temperatures, dimensions, and weight.
Outlines 1 or 2 year warranty based on installation and coverage details.
Lists conditions that are covered and excluded by the warranty.
Provides contact information and procedure for warranty service.