3
Specifications
Model T1S1-10 T1S2-10 T1S1-12 T1S2-12
Nominal Impedance (Ohms) 1 Ω 2 Ω 1 Ω 2 Ω
Frequency Response (Hz) 32-250 28-250 27-250 28-250
Voice Coil Diameter - inch
(mm)
2.5 (4-Layer)
(63.5)
2.5 (4-Layer)
(63.5)
3 (4-Layer)
(76)
3 (4-Layer)
(76)
Displacement - cu. ft.
(Liter)
0.03
(0.82)
0.03
(0.82)
0.11
(3.11)
0.11
(3.11)
Fs - Free Air Resonance (Hz) 42.0 44.0 36.0 37.0
Qts 0.95 1.05 0.89 1.06
Vas - cu. ft.
(Liter)
0.46
(13)
0.46
(13)
1.14
(32.2)
1.14
(32.2)
Xmax - inch
(mm)
0.50
(14.2)
0.50
(14.2)
0.60
(15)
0.60
(15)
SPL (dB @ 1w/1m) 82 83 84 84
Power Handling - Watts
(RMS/Peak)
500/1000 500/1000 600/1200 600/1200
Model T1S1-10/ T1S2-10 T1S1-12/T1S2-12
A - Overall Diameter - inch
(mm)
10.83
(275)
13
(330)
B- Screw Hole Dia. - inch
(mm)
10.16
(258)
12.28
(312)
C- Mounting Dia - inch
(mm)
9.13
(232)
11.22
(285)
D - Mounting Depth - inch
(mm)
3
(76.5)
3
(76.5)
CEA 2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle
power under continuous demand, not instantaneous power handling that over time can damage voice coils.
VERIFIED WITH KLIPPEL
To adorn the ‘Verified with Klippel’ mark, the qualifying company’s loudspeaker engineering personnel must be trained and certified by
Klippel prior to using the three separate Klippel systems to design, develop and test. Rockford Fosgate has made the investment in Klippel to
deliver the best possible speakers and subwoofers to their customers.
A B
D
C
PUSH
to attach
wire
PUSH
to attach
wire
To Next Page
Loading...
Need help?
General
