5
Contents
Installation Tools
The following is a list of suggested tools needed for installation:
• Plastic Trim Panel Pry Tool
• Allen Wrench - 3/16”, 5/32”
• Torx - T10, T25, T27
• (1) Pair of 2-Way Speakers
• (1) Pair of 2015 & Up Road
Glide Grilles
• (1) Pair of 2014 & Up Street
Glide Grilles
• (1) Pair of 2014 & Up Tour-Pak
Grilles
• Installation & Operation Manual
Installation
Installation Considerations
This section focuses on some considerations for installing your motorcycle
replacement speakers. This manual will illustrate the installation of two
different fairing styles and Tour-Pak offered by Harley-Davidson
®
from
the production years ranging from 2014 and Up. (Ultra Classic
®
, Electra
Glide
®
, Street Glide
®
, Tri Glide
®
, Road Glide
®
and Road Glide Ultra
®
.)
If you feel unsure about installing this system yourself, have it installed by
a qualified technician.
Before installation, disconnect the battery
negative (-) terminal to prevent damage to the
unit, fire and/or possible injury.
Before beginning any installation, follow these
simple rules:
• Be sure to carefully read and understand the instructions before
attempting to install these motorcycle speakers.
• Consult your motorcycle’s service manual for model specific
information. Models may differ from year to year depending on factory
options and aftermarket accessories added.
• These motorcycle speakers are a complete replacement to the factory
(OEM) speaker setup.
• With the addition of an amplifier, be sure that your current charging
system is in proper working order.
• Utilize a blanket or fender cover to protect the front fender from tools
or any other item that may be accidentally be dropped while removing
the fairing.
• Visit rockfordfosgate.com for more comprehensive installation
videos and product information.
To Next Page
Loading...
