Need help?Do you have a question about the RockHound BrushHound F-H Series and is the answer not in the manual?
General| Brand | RockHound |
|---|---|
| Model | BrushHound F-H Series |
| Category | Lawn Mower |
| Language | English |
Check off pre-delivery checklist items for operation, adjustment, and safety.
Details the six-month limited warranty on material and workmanship for the BrushHound Shredder.
Step-by-step guide to connecting the BrushHound shredder to a skid steer loader.
Explains the procedure for safely starting the BrushHound shredder and its engine.
Details how to operate the BrushHound shredder, including ground speed and drum rotation.
Instructions for daily greasing of bearings and adapter bearings.
Guides on adjusting cutting height via gauge roller and back gauge roller, and belt tension.
Method for replacing worn or damaged shredder knives safely and effectively.
Procedure for washing the shredder after each use to maintain paint, decals, and bearing areas.
Diagram illustrating the hydraulic plumbing system for the 72F-H and 84F-H attachments.
Steps for safely removing the shredder from the operating vehicle.
Guidelines for cleaning, tensioning, lubricating, and storing the shredder.
Identifies the location of the serial number stamped on the mower shield.
Guidance on obtaining replacement parts from dealers or directly from the factory.
Advice on when to replace knives and belts, and how to adjust belt tension.
Covers hydraulic fluid, belt wear, and securing hydraulic hoses during operation.
Guidance on the amount of hydraulic fluid to add when replacing it.
Discusses advantages of reversing rotation and the procedure to switch it.
Explains the correct method for connecting hydraulic hoses to the vehicle.
Details specifications like cutting width, HP, knives, and weight for F-H series models.
Lists parts for the cutter drum assembly, including bolts, knives, spacers, and pins.
Details parts for the back roller assembly, including bearings, adjusting plates, and fillers.
Lists parts for the drive pulley assembly, including pulleys, bushings, idler arms, and belts.
Lists hydraulic components such as motor protection valve, adapters, hoses, and hydraulic motor.
To Next Page