Rockler Router Table Spline Jig User Manual

Router Table Spline
Jig Instructions
Review full manual instructions prior to use for important safety information.
Always check Rockler.com to conrm that you are using the most recent manual version for your product.
Clamps have been removed for clarity.

Rockler Router Table Spline Jig Specifications

General

Material	Aluminum
Maximum Miter Slot Width	3/4 inch
Includes	Spline Jig, Instructions
Minimum Board Thickness	1/4 inch
Minimum Miter Slot Width	3/4 inch
Compatibility	Router tables with standard 3/4" miter slots
Adjustability	Adjustable for different board thicknesses

Summary

General Safety Warnings

Product Usage and Safety Guidelines

Covers checking for latest instructions, tool compatibility, user condition, and shop practices.

Hazard Identification and Definitions

Explains DANGER, WARNING, CAUTION, NOTICE definitions and specific wood dust warnings.

Jig Setup

Initial Jig Placement and Alignment

Details placing the jig base, centering the bit, and securing it to the router table.

Cutting Spline Slots

Marking and Setup for Slot Cutting

Covers marking spline locations, placing the sled, and setting up the test board.

Performing Cuts and Adjustments

Details routing test slots, checking cuts, and making the first spline slot on the workpiece.

Add Fence Extensions for Narrow Stock

Attaching Fence Extensions

Instructions for cutting and attaching extensions to the fences for narrow stock support.

Add Splines

Dovetail Splines Process

Steps for cutting and fitting dovetail splines using a router table and specific bit.

Straight Splines Process

Instructions for cutting and fitting straight splines into pre-cut slots.