What to do if my Rockville Music Mixer has no sound?
If your Rockville Music Mixer has no sound, here are a few things to check: * Ensure all the appropriate cables are correctly plugged in. * Check the Master Volume settings. * Examine the individual level control of each channel, as well as the MP3 and CD/Tape volume controls. * Make sure your microphone(s) is on.
How to fix a Rockville Music Mixer that won't turn on?
If your Rockville Music Mixer has no power, please check the following: 1. Make sure the unit is plugged in and the power switch is in the ON position. 2. Ensure the power cable is tightly connected to the unit. 3. Inspect and replace the fuse if needed. Refer to the fuse replacement diagram.
Why is Bluetooth pairing failing on my Rockville Music Mixer?
If you're experiencing Bluetooth pairing issues or no sound with your Rockville Music Mixer, try these steps: 1. Verify that both devices are turned on and your Bluetooth device is discoverable. 2. Turn both devices off and then on again. 3. Select the correct source on the mixer. 4. Ensure the Bluetooth device is within 5 feet of the unit. 5. Move both devices away from other electronics like Bluetooth devices, microwaves, and wireless routers. 6. Confirm the unit isn't connected to a previously paired device. 7. Check that all volume controls are properly set.
How to eliminate noise from my Rockville RPM109 Music Mixer?
To address noise issues with your Rockville Music Mixer: 1. Turn down the channel levels one by one. If the noise stops, the problem lies with that channel or the device plugged into it. 2. Unplug the devices to see if the sound disappears. 3. Ensure you're using the correct cables. For ¼” cables, there are instrument, TS (unbalanced), and TRS (balanced) types. Verify the connected gear's requirements and use the appropriate cable.
What causes a buzzing sound in my Rockville RPM109?
To resolve a buzzing sound with your Rockville Music Mixer, ensure you are using the correct type of cable. For ¼” cables, there are three types: instrument, TS (unbalanced), and TRS (balanced). Check the requirements of your connected equipment and use the appropriate cable.
What to do if my Rockville RPM109 won't play SD/USB?
If your Rockville Music Mixer is not playing back from SD or USB, consider the following: 1. Check that your SD card or USB flash drive is not damaged. 2. Ensure the SD card or USB drive is formatted as FAT or FAT32, as NTFS formats are not recognized. 3. Confirm that the files on the media device are not corrupt. 4. Make sure the files are properly formatted as WAV, MP3, or WMA.
General| Microphone Inputs | 4 |
|---|---|
| USB Interface | Yes |
| Phantom Power | Yes |
| Power | AC 100-240V |
| Inputs | 4 XLR |
Covers electrical shock, moisture, ventilation, and stable placement for safe operation.
Details EQ, Pan, Level, PAD, and CLIP LED for input channels.
Covers digital effects, monitor controls, graphic EQs, and main level adjustments.
Explains the USB/SD/MP3 controller and inputs for channels 11/12.
Lists front panel input/output ports including Aux In, FX Out, and Foot Switch.
Details the power switch, IEC socket, fuse, and fan cooling system.
Describes the speakON Monitor and Bridged outputs, and MAIN outputs.
Details 3-band EQ, Pan, Level, PAD switch, and CLIP LED for input channels.
Explains monitor control, effect control, and routing to effect bus.
Covers program selection, effect level, and monitor effectiveness of digital effects.
Describes Line/High impedance, XLR microphone inputs, and stereo channel inputs.
Details main control, USB/SD/BT controller, mode selection, and foot switch input.
Explains FX out, line out, power status, phantom power, and amplifier mode LEDs.
Covers graphic equalizers for main/monitor, SD/USB input format, and power amp controls.
Details power switch, IEC socket, fuse, fan cooling, and output connector types.
Guides on pairing a Bluetooth device and controlling playback.
Explains USB/SD mode, file format requirements, and music playback controls.
Instructions for navigating and selecting folders for USB/SD playback.
Details channel count, EQ, phantom power, and effects processor.
Lists RMS, Program, and Peak Power Output specifications at different impedances.
Details input/output connectors, AC input voltage, and cooling system.
Solutions for no power, no sound, and noise problems.
Troubleshooting for buzzing sounds and cable type recommendations.
Addresses Bluetooth pairing failures and issues with USB/SD playback.
Instructions for safely replacing the fuse using a screwdriver.
Declares compliance with FCC rules for the RPM109 mixer.
Provides advice on correcting radio or TV reception interference.
To Next Page