126 Publication IASIMP-QS003B-EN-P - October 2009
Chapter 10 Add Distributed Point I/O Modules to the Project
Create a DeviceNet Scanlist
Go Online. Required for DeviceNet System
1. Right-click the
1769-SDN module and
select Properties.
2. Select the Scanlist tab.
3. Click Upload to upload
configuration from the
device.
4. Select the 1734-ADN
device and move it to the
Scanlist.
5. Verify that Automap on
Add is checked and click
Apply.
To Next Page
Loading...
