69Publication IASIMP-QS003B-EN-P - October 2009 69
Chapter
5
Prepare the PanelView Plus Terminal
Introduction
In this chapter, you mount and wire the PanelView Plus terminal. You also configure network
communication and make network connections.
Before You Begin
• Assemble your CompactLogix hardware (Chapter 1).
• Determine which network to use.
– EtherNet/IP network (option 1) using Ethernet connection
– DeviceNet network (option 2) using serial connection
What You Need
• PanelView Plus terminal
• Standard CAT5 Ethernet cable for Ethernet connection (option 1)
• 2711-NC13 cable for a serial connection
To Next Page
Loading...
