Rockwell Automation Publication 1715-UM001J-EN-P - December 2020 175
Chapter 6 Configure the Redundant I/O System
The I/O Configuration folder of your project now looks similar to this.
Obtaining System Status
There are two ways to access the status of the primary and secondary adapters:
• Via the Add-on Profile while online with the application
• Via the tags in the owner controller
Check Adapter Status While Online via the Add-on Profile
To check the status of the primary and secondary adapters while online, follow
these steps.
1. In the application, from the I/O Configuration Tree, right-click the 1715
adapter and choose Properties.
The Module Properties dialog box appears.
To Next Page
Loading...
