Rockwell Automation Allen-Bradley 1794-IB16D - Chapter 4: Configuring for Remote I;O Network

Rockwell Automation Publication 1794-UM061B-EN-P - March 2020 35
Chapter 4
Configuring Modules for Communication on a
Remote I/O Network
Chapter Objectives
This chapter provides you with the RSLogix 5000® software steps you need to
configure a 1756-DHRIO module, remote adapter, and block transfer and digital
modules for use with a ControlLogix® controller on a Remote I/O (RIO)
network.
For this Information: See page:
Add a DHRIO module to the project 36
Add a 1794-ASB adapter to the project 39
Configuring Block Transfer Modules 42
Create a Block Transfer (Read or Write)
Message Instruction
44
ControlLogix Chassis with
1756-DHRIO module
Remote I/O Network
1771-ASB Adapter
1794-ASB Adapter
1747-ASB Adapter
PLC-5® Controller in Adapter Mode