70 Rockwell Automation Publication 1794-UM061B-EN-P - March 2020
Chapter 6 Configure Your Adapter and Digital Modules on a ControlNet Network
Download the Program to
the Controller
Follow this procedure to download the program you saved to the ControlLogix
controller.
1. From the main menu, choose Communications>Who-Active.
2. Select the processor slot in the chassis.
3. From the Who Active dialog, choose Set Project Path.
4. From the Who Active dialog, choose Download to see the Download
dialog.
5. From the Download dialog, choose Download.
You see this RSLogix 5000 dialog.
To Next Page
Loading...
