Rockwell Automation Allen-Bradley 1794-IB16D - Schedule I;O Module Connections

72 Rockwell Automation Publication 1794-UM061B-EN-P - March 2020
Chapter 6 Configure Your Adapter and Digital Modules on a ControlNet Network
2. Click the Connection tab.
Notice that the connection request error is still present because we haven’t
scheduled any of the I/O module connections yet. You do that through
RSNetWorx for ControlNet.
Schedule I/O Module
Connections
Use these procedures to schedule I/O module connections.
1. Start RSNetWorx for ControlNet.
2. From the File menu, choose New.
3. Click OK.
4. Choose Network>Online.