Rockwell Automation Allen-Bradley 1794-IB16D - Access Module Data via 1794-ACN15 Adapter

Rockwell Automation Publication 1794-UM061B-EN-P - March 2020 77
Configure Your Adapter and Digital Modules on a ControlNet Network Chapter 6
25. Notice that all yellow warning triangles are gone in the I/O Configuration
once connections are scheduled…
26. Notice that the Status in the 1794-ACN15 Module Properties dialog is
Running with no faults.
Access Module Data via
the 1794-ACN15 Adapter
Use the following information to use the 1794 FLEX I/O ControlNet adapter
data in the ladder logic program.
• ACN15 = the name you gave to your ControlNet adapter
• # = slot number of FLEX I/O module (0…7)
• C = configuration, I = input, O = output
When there is no slot number, that is the rack-optimized data.
Here are some typical sample configuration data examples.
clear
of
faults