158 Rockwell Automation Publication D2-3518-4 - January 2020
Chapter 9 Parameter Descriptions
The RMS input phase current Is is displayed as x.x A.
The RMS input phase current It is displayed as x.x A.
The active input current is displayed as ±x.x A. Motoring current is positive and
generating current is negative.
The reactive input current is displayed as x.x A. This value should always be
near 0.
The RMS phase-to-phase input voltage Vrs is displayed as x.x V.
3
Input Current S
Range: 0.0...3276.7 A [0.1 A]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
4
Input Current T
Range: 0.0...3276.7 A [0.1 A]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
5
Active Current
Range: ± 3276.7 A [0.1 A]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
6
Reactive Current
Range: 0.0...3276.7 A [0.1 A]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
7
Input Voltage RS
Range: 0.0...3276.7 V AC [0.1V AC]
Default: Read Only
Access: 0 Path: Monitor > Metering
See also:
To Next Page
Loading...
