66 Rockwell Automation Publication 2080-QS004C-EN-E - October 2023
Chapter 13 PanelView 800 Graphic Terminal Design in Connected Components Workbench Software
4. Select “Ethernet” from the Port dropdown box and select “Allen-Bradley Micro800 CIP” from the Protocol dropdown box.
5. By default, a controller node has already been created and added to your application, but it is necessary to specify the IP address of
the controller. For this example, enter “192.168.1.4” in the Address field.
You have now learned how to add and configure a PanelView 800 terminal to your project.
To Next Page
Loading...
