Rockwell Automation Allen-Bradley PowerFlex 755TS TotalFORCE Control - Three-phase Power Terminal Locations

Rockwell Automation Publication 750-IN119A-EN-P - April 2022 65
Chapter 5 Power Wiring
Three-phase Power
Terminal Locations
This section shows the locations of the power block and termination points.
Figure 41 - Frames 1…5 Power Terminal Block and Termination Point Locations
1
1
1
1
1
2
2
2
3
4
2
2
Frame 2
Frame 3
Frame 4
Frame 5
Frame 1
No. Name Description
1 Power terminal block R/L1, S/L2, T/L3, BR1, BR2, +DC, -DC, U/T1, V/T2, W/T3
2 PE grounding studs
Terminating point to chassis ground for incoming AC line and
motor shields.
3
Optional NEMA/UL Type 1 conduit
box
Terminating point to chassis ground for incoming AC line, motor
shields, and control wire shields.
4 Optional EMC plate
Terminating point to chassis ground for incoming AC line, motor
shields, and control wire shields.