Node Controller Hardware User Manual 27
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
Safety 2
Overview
This chapter describes safety guidelines for the MagneMotion
®
node controllers and their use
in a transport system. All personnel that are involved in the installation, operation, or mainte-
nance of the transport system must be familiar with the safety precautions that are outlined in
this chapter.
NOTE: These safety recommendations are basic guidelines. If the facility where the node
controllers are installed has additional safety guidelines, they must be followed
along with the applicable local and national safety codes.
If any additional safety-related upgrades or newly identified hazards that are associated with
the node controllers are identified, the ICT Customer Support group notifies the owner of
record.
Included in this chapter are:
• Regulatory compliance information.
• Personnel and equipment safety guidelines.
• Symbol identification.
• Label identification and locations.
• Identification of electrical hazards.
• Recycling and disposal Information.
To Next Page
Loading...
