Safety
Safety Considerations
Node Controller Hardware User Manual 31
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
• Do not place the node controllers in a location where they can be subject to physical
damage.
• Make sure that all electrical connections to the node controllers are made in accor-
dance with the appropriate facility, local, and national regulations.
• Make sure that the node controllers receive proper airflow for cooling.
• Do not remove safety labels or equipment identification labels.
• Turn OFF power supplies before inserting or removing the node controller power
cables.
• Use of the node controllers for any purpose other than as controllers for a linear trans-
port system is not recommended and can damage the node controllers or the equip-
ment they are connected to.
• Keep cables and connectors away from heated surfaces.
• Do not modify the connectors or ports.
To Next Page
Loading...
