Specifications and Site Requirements
Mechanical Specifications
Node Controller Hardware User Manual 57
Rockwell Automation Publication MMI-UM013B-EN-P - April 2020
NC-E Node Controller
Figure 4-4: NC-E Node Controller Mechanical Drawing
NOTE: Mounting kits for surface mounting and DIN rail mounting are supplied with the
node controller.
Ingress Protection Rating: Designed for IP30.
See NC-E Node Controller on page 68 for the electrical specifications.
Contact ICT Customer Support for current detail drawings.
Exposed Materials
The node controller has unprotected openings and must not be installed in locations where
harsh conditions exist.
All Dimensions in Millimeters [Inches]Weight: 0.65 kg [1.43 lb]
[4.7]
120
[2.2]
55
[2.0]
51
[2.5]
64
[2.5]
64
[2.5]
64
[3.9]
100
To Next Page
Loading...
