Rockworth AO620/0414 - User Manual

12V
MINI COMPRESSOR
AO620/0414

Summary

Specifications and Cautions

Motor Specifications

Details the 12-volt DC power requirement for the compressor.

Pressure Ratings

Specifies the rated and maximum working pressure limits.

Operating Time Limit

States the maximum recommended continuous operating time.

Electrical System and Connection Safety

Warns about using only 12V systems and avoiding sparks during connection.

Operational Heat and Lubrication Warnings

Advises on cooling periods after operation and that lubrication is permanent.

Handling Hot Unit

Alerts users that the unit becomes hot during use and requires caution.

Tire Inflation Safety

Stresses inflating tires only to manufacturer's recommended pressure to prevent injury.

General Handling and Cleaning

Advises keeping unit from children and cleaning with a damp cloth only.

Intended Use for Air Inflation Only

Clarifies the unit is only for inflating air and not for breathable air.

Caution for Small Object Inflation

Advises extra caution and close monitoring when inflating small items like balls.

Operation Instructions

Initial Setup and Connections

Instructions on placing the unit, attaching the air filter, and connecting to power.

Lampshade Switch Functions

Explains the functions of the lampshade switch for lighting and signaling.

Valve Stem and Air Hose Connection

Details on connecting the air hose to the valve stem, emphasizing finger tightening.

Compressor Operation and Pressure Monitoring

Instructions on starting the unit, monitoring pressure, and stopping at the correct level.

Post-Operation Procedures

Steps for disconnecting power, removing the inflator, and cooling the unit.

Storage Instructions

Guidance on storing the unit in a dry location after use.

Warranty and Support Information

Limited Warranty Details

Outlines the limited warranty for material and workmanship defects.

Warranty Exclusions

Specifies conditions not covered by the warranty, like accidental damage or misuse.

Further Information Sources

Directs users to the instruction manual and website for more details.

Manufacturer and Distributor Contact

Provides contact details and address for the manufacturer/distributor.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features
5. Warranty Information

The Rockworth 12V Mini Compressor (model A0620/0414) is a portable air compressor designed for inflating various items, primarily tires and sports balls. It operates on a 12-volt DC electrical system, making it suitable for use with vehicle power outlets. The compressor is intended for domestic and light industrial use.

Function Description:

The primary function of this mini compressor is to inflate objects requiring air pressure. It connects to a 12-volt power source, typically a car's outlet, and delivers compressed air through an air supply hose and an inflator. The unit includes a pressure gauge to monitor inflation and ensure items are inflated to their recommended pressure. It also features a switch with multiple functions on the lampshade: the first touch illuminates, the second defends against fog, the third provides a warning, and the fourth closes the unit.

Important Technical Specifications:

• Motor: 12-Volt DC
• Rated Working Pressure: 4 Bar (58 PSI)
• Maximum Working Pressure: 6 Bar (87 PSI)
• Maximum Recommended Continuous Operating Time: 30 minutes

Usage Features:

• Setup:
  1. Place the unit on a dry, level surface.
  2. Attach the air filter to the front of the unit, finger-tight.
  3. Connect the air supply hose to the unit using the quick-connecting fitting.
  4. Connect the compressor's point butt to the car's outlet.
• Inflation Process:
  1. Ensure the valve stem of the item to be inflated is clean and free of dirt.
  2. Connect the air hose by screwing the brass inflator onto the valve stem. Only finger-tighten the inflator; do not use tools that could damage it.
  3. Turn the compressor switch to "on" to start air flow into the tire or object.
  4. Monitor the pressure gauge closely.
  5. Stop the motor when the manufacturer's recommended pressure is achieved.
• Post-Inflation:
  1. Remove the inflator from the valve stem.
  2. Replace the valve cover on the stem.
  3. Disconnect the power cord.
  4. Remove the air filter.
  5. Allow the unit to cool down.
  6. Place the unit neatly in its carry bag.
  7. Store the unit in a dry location.
• Safety Precautions:
  • Power Connection: Use extreme caution when connecting to a power source to avoid sparks from explosive gases. Consult your vehicle's manual or a qualified mechanic for proper connection.
  • Overheating: After 30 minutes of continuous operation, allow the unit to cool before restarting to prevent damage from overuse. The unit can become hot during use, so exercise caution to avoid burns. Only hold the unit by the carry handle while it cools.
  • Inflation Pressure: Only inflate tires to the manufacturer's recommended pressure. Over-inflation can lead to serious injury.
  • Small Objects: When inflating small objects like bicycle tires or sports balls, use extra caution. Pay close attention to the pressure gauge and be prepared to stop the unit quickly once the recommended inflation pressure is reached.
  • Intended Use: Do not use the unit for pumping any gas or liquid other than air. It is not designed as a source of breathable air.
  • Personal Protective Equipment: The use of work gloves and safety glasses is recommended during operation.
  • Children: Keep the unit out of reach of small children.

Maintenance Features:

• Lubrication: The compressor is permanently lubricated during assembly; do not add oil or any other lubricant.
• Cleaning: Clean the unit with a damp cloth only. Do not use chemical soaps.
• Storage: Store the unit in a dry location after allowing it to cool.

Warranty Information:

Rockworth products come with a limited warranty covering defects in material and workmanship from the date of purchase. This warranty applies to domestic/light industrial use and does not cover defects resulting from accidental damage, improper use, or exceeding the product's design limits. For more information, users are advised to read the instruction manual and visit www.rockworthproducts.co.za. The product is manufactured and distributed by Agrinet (Pty) Ltd.

Rockworth AO620/0414 Specifications