EasyManua.ls Logo

roco WLANmaus Z21 - Page 65

roco WLANmaus Z21
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
English
3.6.4 „DEVICE NAME“
You can allocate a network name to your WLANmaus here. In order to prevent the same na-
mes in the network, this is automatically supplemented with the last six gures or the MAC
address of the WLANmaus. For example: “WLANmaus_A1B2C3“ (Hexadecimal).
3.6.5 „IP-MODE“
Selection possibilities: “DYNAMIC" (pre-set) or “STATIC“.
Selection: using the arrow key, conrmation with the
OK-key, cancel with the OK-key.
“DYNAMIC“: The network information (IP-ADRESSE, SUBNETZMASKE and STD-GATE-WAY) is
automatically obtained from the WLAN router. The obtained information can be
displayed in menus 3.6.6-3.6.8.
“STATIC“: The network information (IP-ADRESSE, SUBNETZMASKE and STD-GATE-WAY)
are to be entered manually. CAUTION: an extended network knowledge is neces
sary! The entry is made in menus 3.6.6-3.6.8.
3.6.6 „IP-ADDRESS“
Display (if IP-MODE = DYNAMIC) or entry (if IP-MODE = STATIC) of the IP address. Clicking
through the four IP positions using the OK-key, changing of the values using the arrow keys
or by using the number keys, you can cancel this by using the STOP-key
3.6.7 „SUBNETMASK“
Display (if IP-MODE = DYNAMIC) or entry (if IP-MODE = STATIC) of the subnetwork mask.
Change the value using the arrow keys or by using the number keys, you can cancel this by
using the STOP-key.
3.6.8 „STD-GATEWAY“
Display (if IP-MODE = DYNAMIC) or entry (if IP-MODE = STATIC) of the standard gateway.
change the value using the arrow key or by using the number keys, you can cancel this by
using the STOP-key.
3.6.9 „MAC-ADRESSE“
Information display: displays the MAC address for your WLANmaus. The display can be clicked
through using the OK-key.
3.6.10 „RSSI“
Information display: displays the WLAN signal strength in dBm (decibel milliwatt).
3.7
TURN-OFF TIME”
To save battery power of the WLANmaus, the unut switches off automatically after a dened period
of time when not being used.
Value range: 1–255, factory setting: 10 minutes
Select with the arrow keys and conrm input with the OK-key. You are returned to “TURN-OFF
TIME.
Menus
8010813920.indd 65 13.07.2017 10:27:50

Related product manuals