ROD-L M100AVS5 User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

ROD-L M100AVS5 Specifications

General

Model	M100AVS5
Accuracy	±1%
Power Supply	AC 100-240V, 50/60Hz
Operating Temperature	0 ~ 40 °C
Protection	Overcurrent, Overvoltage, Short Circuit

Summary

ROD-L Hipot Tester Quick Start Guide

Device Requirements for Testing

Lists necessary items for self-test and basic device testing, including ground sense wire and power cord.

Self Test Procedure

Step-by-step instructions for performing the self-test of the ROD-L unit.

Basic Device Test Procedure

Step-by-step instructions for testing a basic device with the ROD-L unit.

Front Panel Controls and Settings

Large Variac Knob Function

Explains the Variac scale as a percentage of full-scale capability for voltage output.

Total Current Potentiometer

Describes the 10-turn potentiometer for setting the maximum current output trip point.

Real Current Potentiometer

Details the 10-turn potentiometer for adjusting the real current trip point.

Under Current Potentiometer

Explains the potentiometer for setting a minimum current draw requirement, recommending it be set to 0.

General Safety Guidelines

Built-in Safety Features

Lists safety features like chassis ground sense, recessed start button, and alarm circuitry.

Connection and Operation Precautions

Advises on using grounded outlets, verifying voltage selectors, and avoiding contact with metal contacts.

Fuse Replacement and Testing Safety

Instructs to turn off power and disconnect cord before changing fuses and not to touch DUT during tests.