V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Control and Display Elements
Four push>
buttons with
protective caps
(10.5¥10.5 mm)
Control or display
element
No.
19
20
Six pushbuttons
with protective
caps
(10.5¥10.5 mm)
LSB
USB
AM
FM
CW
FSK
MGC AGC
FAST
SLOW
DGC
Design Description
Actuate the respective modulation mode
key in order to select the desired mod>
ulation mode.
If the default setting is activated, altering
the modulation mode automatically sets
the appropriate values (see 3.1.8) for
bandwidth, BFO frequency as well as type
and time of control.
The demodulation parameters for the
modulation mode FSK are altered via the
demodulation parameter menu (see
3.1.8.4).
Another possibility of altering the mod>
ulation mode is via the modulation mode
menus 2 *, 3 * and 4 * (see 3.1.8.2).
The currently effective modulation mode
is indicated in the modulation mode field
(3).
Actuate the respective control type key
several times, if need be, until the desired
type of control is indicated in the control
type field (9).
After actuating the key DGC the following
display appears in the display field (36):
DGC VALUE _ dBoV
A DIGI GAIN value can be entered via the
numeric keypad (27) acc. to 3.1.11.3.
After actuating the key the following
display appears in the display field (14):
25 150 500 1s 3s
≤ Fast ≥ ≤ Slow ≥
Select the desired time of control.
The currently effective time of control is
displayed in the control type field (5).
FAST
SLOW
for EK 896 only
for EK 896 only
6164.0717.02_01
> 3.82 >
To Next Page
Loading...
