Fig. 3.3 Control and Display Elements of VLF-HF Receivers R&S EK 895 (Remote)
Key POWER:
Switches receiver on or off
LED on: receiver switched on
1
LED HF-Teil - RF UNIT:
LED on:
• LED test (by power on or BIT)
• Module RF unit defective
LED ZF/NF PROZESSOR - IF/AF PROCESSOR:
LED on:
• LED test (by power on or BIT)
• Module IF/AF processor defective
LED SYNTHESIZER:
LED on:
• LED test (by power on or BIT)
• Module synthesizer defective
LED OPTION1:
LED on:
• LED test (by power on or BIT)
• Module in plug-in slot 1 defective
LED OPTION2:
LED on:
• LED test (by power on or BIT)
• Module in plug-in slot 2 defective
2
3
4
5
6
To Next Page
Loading...
