Rohde & Schwarz 890 Series - IF Converter R&S UX 895

V L F > H F R E C E I V E R S f R & S E K 8 9 5 / R & S E K 8 9 6
User Manual f Replacement of Modules
4.3.13 IF Converter R&S UX 895
Removal
1. Remove IF / AF Processor acc. to 4.3.9.
2. Undo and remove 13 screws fixing the RF
cover to the components side.
3. Cautiously pull IF Converter R&S UX 895
out of terminal strips X77 (see Fig. 4.7) and
X78 towards the top.
Installation
Installation is to be carried out in the reverse
order of removal.
Fig. 4.7 Location of Terminal Strips X77 and X78
6164.0717.02_01
> 4.34 >