V L F > H F R E C E I V E R S
f
R & S E K 8 9 5 / R & S E K 8 9 6
User Manual
f
Cabling
Fuse:
100 / 120 V: IEC 127 > T1.25/250 V
220 / 240 V: IEC 127 > T630/250 V
AF
AF
10. Connection of a mains voltage
Connect the recessed 3>way socket via the
supplied power cable to the external
mains.
C A U T I O N
Before connecting the receiver to the
external AC supply network check
whether the set mains voltage (see
voltage selector) agrees with the mains
voltage available. Perform this check also
for the fuse. If required, alter the setting
(see A1.2) and / or insert new fuse (see
A1.2).
The cable (DS 025.2365) required for con>
nection to the external mains is supplied
as an accessory.
11. Connection of headphones
(R&S EK 895, remote>controlled)
Connect the jack>type socket to external
headphones.
As the maing contact we recommend to
use a 6.3>mm jack>type connector
(FT!019.0487).
12. Connection of headphones or a loud>
speaker (R&S EK 895, local>controlled)
Connect the jack>type socket to external
headphones or a loudspeaker.
As the maing contact we recommend to
use a 6.3>mm jack>type connector
(FT!019.0487).
Adjust the volume by means of the AF
control on the front panel, as required.
13. Connection of headphones
(R&S EK 896, front)
Connect the jack>type socket to external
headphones.
As the maing contact we recommend to
use a 6.3>mm jack>type connector
(FT!019.0487).
Adjust the volume by means of the AF
control on the front panel, as required.
6164.0717.02_01
> 2.12 >
To Next Page
Loading...
