R&S
®
CMW 500 Command Reference
Instrument-Control Commands
Operating Manual 1202.3986.32 – 03 118
Response Directory information in the following format:
<used_size>,<free_disk_space>
{,<parent_directory}{,<file_name>,<format>,<file_size>}
The first two numeric parameters denote the total amount of
storage currently used in the directory and the total amount of
storage available, both expressed in bytes. All files are returned
with their file name and their size in bytes.
Example MMEM:CAT?
Response:
235009,5195137024,".,DIR,0","..,DIR,0","SaveFil
e001.xml,BIN,78335","SaveFile002.xml,BIN,78338"
Characteristics Firmware version V1.00
SCPI-confirmed, query only
MMEMory:CDIRectory '<directory_name>'
Changes the default directory for mass memory storage.
'<directory_name>' String parameter to specify the directory.
Def. value: – (A *RST does not change the current directory)
Example MMEM:CDIR 'C:\Temp\Setups\CMW_Setups'
Change to the specified directory
Characteristics Firmware version V1.00
SCPI-confirmed, command or query (returns the current
directory)
MMEMory:COPY '<file_source>'[,'<file_destination>']
Copies an existing file to a new file.
'<file_source>',
'<file_destination>'
String parameters to specify the name of the file to be copied
and the name of the new file.
If no file destination is specified the source file is written to the
current directory, to be queried with MMEMory:CDIRectory?.
Def. value: –
Example MMEM:COPY
'C:\USER\DATA\CMW_quickstart.pdf','A:'
Copy file CMW_quickstart.pdf in directory C:\USER\DATA to an
external storage medium, mapped to drive A:\.
Characteristics Firmware version V1.00
SCPI-confirmed, no query
To Next Page
Loading...
