R&S
®
CMW 500 GPRF Applications
GPRF GUI Reference
Operating Manual 1202.3986.32 – 03 160
Power measurement results: Table View
7.2.3 External Power Sensor: Parameters and Settings
The External Power Sensor measurement is configured using the following groups of
settings:
Measurement Control
External Power Sensor Configuration
The most important measurement settings are also displayed in the measurement
dialog. The measurement dialog provides all Measurement Results.
7.2.3.1 Measurement Control
The measurement is turned on or off using the "EPS" measurement control softkey
and the ON | OFF or RESTART | STOP front panel keys.
EPS (Softkey)
Turns the measurement on or off; see Measurement Control. The measurement state
is shown in the softkey. Additional measurement substates may be retrieved via
To Next Page
Loading...
