R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 269
<Stat RMS Current>,
<Stat RMS Average>,
<Stat RMS Max>,
<S
tat Peak Current>,
<Stat Peak Average>,
<Stat Peak Max>,
<S
t
at 95%>
ON: Apply limit to the Current, Average, Max, 95th percentile
values
OFF: Do not apply limit
Def. value: ON
Characteristics Firmware version V1.00
CONFigure:GSM:MEAS<i>:MEValuation:LIMit:GMSK:PERRor
<Limit RAMS>, <Limit Peak>, <Limit 95%>, <Stat RMS Current>, <Stat RMS
Average>, <Stat RMS Max>, <Stat Peak Current>, <Stat Peak Average>, <Stat
Peak Max>, <Stat 95%>
Defines and activates upper limits for the RMS, peak and 95th percentile values of the
phase error.
<Limit RMS>, Range: 0 deg to 180 deg
Def. value: 5 deg
Def. unit: deg
<Limit Peak>, Range: 0 deg to 180 deg
Def. value: 20 deg
Def. unit: deg
<Limit 95%>, Range: 0 deg to 180 deg
Def. value: 5 deg
Def. unit: deg
<Stat RMS Current>,
<Stat RMS Average>,
<Stat RMS Max>,
<
S
tat Peak Current>,
<Stat Peak Average>,
<Stat Peak Max>,
<S
t
at 95%>
ON: Apply limit to the Current, Average, Max, 95th percentile
values
OFF: Do not apply limit
Def. value: ON
Characteristics Firmware version V1.00
CONFigure:GSM:MEAS<i>:MEValuation:LIMit:GMSK:IQOFfset
<Limit>, <Stat Current>, <Stat Average>, <Stat Max>
Defines and activates upper limits for the I/Q origin offset values.
<Limit>, Range: -100 dB to 0 dB
Def. value: -30 dB
Def. unit: dB
To Next Page
Loading...
