Rohde & Schwarz CMW 500 - Fetch:gsm:meas<I>:Mevaluation:pvtime; Fetch:gsm:meas<I>:Mevaluation:trace:smodulation:frequency; Read:gsm:meas<I>:Mevaluation:pvtime; Read:gsm:meas<I>:Mevaluation:trace:smodulation:frequency

R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 290
evaluation measurement.
FETCh:GSM:MEAS<i>:MEValuation:PVTime?
READ:GSM:MEAS<i>:MEValuation:PVTime?
Returns burst power values for slot 0 to slot 7. In addition to the current value statistical
values are returned (average, minimum and maximum). The relative number of bursts
out of tolerance is also returned.
Returned values
<Reliability>, Reliability indicator
<Average 0>,
...,
<Average 7>,
<Current 0>,
...,
<Current 7>,
<Maximum 0>,
...,
<Maximum 7>,
<Minimum 0>,
...,
<Minimum 7>,
"Average", "Current", "Maximum" and "Minimum" burst power
values for slot 0 to slot 7
Range: -137 dBm to +53 dBm
Def. unit: dBm
<Out Tolerance> Percentage of measurement intervals / bursts of the statistic
count
(CONFigure:GSM:MEAS<i>:MEValuation:SCOunt:PVTime
) exceeding the specified limits, see Limits (Power vs. Time).
Range: 0 % to 100 %
Def. unit: %
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
8.4.2.24 Spectrum Modulation Measurement Results
The following commands return the spectrum modulation frequency (ACP modulation)
results of the multi-evaluation measurement.
FETCh:GSM:MEAS<i>:MEValuation:TRACe:SMODulation:FREQuency?
READ:GSM:MEAS<i>:MEValuation:TRACe:SMODulation:FREQuency?
Returns the average burst power measured at a series of frequencies. The frequencies
深圳德标仪器 135-1095-0799