Rohde & Schwarz CMW 500 - Fetch:gsm:meas<I>:Mevaluation:smodulation; Read:gsm:meas<I>:Mevaluation:smodulation; Spectrum Switching Measurement Results

R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 291
are determined by the offset values defined via the command
CONFigure:GSM:MEAS<i>:MEValuation:SMODulation:FOFFsets. All defined
offset values are considered (irrespective of their activation status).
Returned values
<Reliability>, Reliability indicator
<Pow Offset -19>,
...,
<Pow Offset -0>,
<Pow Carrier>,
<Pow Offset +0>,
...,
<Pow Offset +19>
<Pow Offset +/-n> refers to the average burst power at the
carrier frequency +/- the frequency offset value number n.
Range: -100 dB to 20 dB
Def. unit: dB
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:GSM:MEAS<i>:MEValuation:SMODulation?
READ:GSM:MEAS<i>:MEValuation:SMODulation?
Returns general spectrum modulation frequency results.
Returned values
<Reliability>, Reliability indicator
<Out of Tol>, Percentage of measurement intervals / bursts of the statistic
count
(CONFigure:GSM:MEAS<i>:MEValuation:SCOunt:SMODul
ation) exceeding the specified limits, see Limits (Spectrum
Modulation)
Range: 0 % to 100 %
Def. unit: %
<Carrier Power> Measured carrier output power (reference power)
Range: -100 dBm to +100 dBm
Def. unit: dBm
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
8.4.2.25 Spectrum Switching Measurement Results
The following commands return the spectrum switching frequency (ACP switching)
results of the multi-evaluation measurement.
深圳德标仪器 135-1095-0799