Rohde & Schwarz CMW 500 - Measurement Results (Single Values Overview)

R&S
®
CMW 500 GSM Applications
GSM Command Reference
Operating Manual 1202.3986.32 – 03 295
FETCh:GSM:MEAS<i>:MEValuation:BPOWer?
READ:GSM:MEAS<i>:MEValuation:BPOWer?
Returns the burst power measured in the "Measured Slot". In addition to the current
value statistical values are returned (average, maximum and standard deviation).
Returned values
<Reliability>, Reliability indicator
<Current>,
<Average>,
<Maximum>,
Range: -137 dBm to 53 dBm
Def. unit: dBm
<Std Dev> Range: -80 dBm to 80 dBm
Def. unit: dBm
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:GSM:MEAS<i>:MEValuation:AMPM?
READ:GSM:MEAS<i>:MEValuation:AMPM?
Returns the AM-PM delay measured in the "Measured Slot". In addition to the current
value statistical values are returned (average, minimum/maximum and standard
deviation). The AM-PM delay is determined for 8PSK modulation only (for other
modulation types zeros are returned).
Returned values
<Reliability>, Reliability indicator
<Current>,
<Average>,
<Min/Max>,
Range: -0.9225 fs to 0.9225 fs (a quarter of a symbol period)
Def. unit: fs
<Std Dev> Range: 0 fs to 0.46125 fs
Def. unit: fs
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
8.4.2.27 Measurement Results (Single Values Overview)
The following commands allow to retrieve all single value measurement results.
FETCh:GSM:MEAS<i>:MEValuation:MODulation:AVERage?
深圳德标仪器 135-1095-0799