R&S
®
CMW 500 WCDMA Applications
WCDMA Command Reference
Operating Manual 1202.3986.32 – 03 362
<IQ Origin Offset>, I/Q origin offset
Range: -100 dB to 0 dB
Def. unit: dB
<IQ Imbalance>, I/Q imbalance
Range: -100 dB to 0 dB
Def. unit: dB
<Carr Freq Error>, Carrier frequency error
Range: -5000 Hz to +5000 Hz
Def. unit: Hz
<Trans Time Err>, Transmit time error
Range: -500 chips to 500 chips
Def. unit: chip
<UE Power>, User equipment power
Range: -100 dBm to +60 dBm
Def. unit: dBm
<Slot> Measured slot
Range: 0 to 119
Def. unit: -
Example See Performing Single Shot Measurements
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:WCDMa:MEAS<i>:MEValuation:MODulation:SDEViation?
READ:WCDMa:MEAS<i>:MEValuation:MODulation:SDEViation?
Returns the standard deviation single value results.
Returned values
<Reliability>, Reliability indicator
<EVM RMS>,
<EVM Peak>,
Error vector magnitude RMS and peak value
Range: 0 % to 50 %
Def. unit: %
<Mag Err RMS>,
<Mag Err Peak>,
Magnitude error RMS and peak value
Range: 0 % to 50 %
Def. unit: %
<Phase Err RMS>,
<Phase Err Peak>,
Phase error RMS and peak value
Range: 0 deg to 90 deg
Def. unit: deg
To Next Page
Loading...
