R&S
®
CMW 500 WiMAX Applications
WiMAX GUI Reference
Operating Manual 1202.3986.32 – 03 376
WiMAX modulation schemes
10.2 WiMAX GUI Reference
The following sections provide detailed reference information on the parameters of the
WiMAX application. The R&S CMW 500 provides the following WiMAX measurements:
Multi Evaluation
10.2.1 WiMAX Multi Evaluation: Parameters and Settings
The WiMAX multi-evaluation measurement is configured using the following groups of
settings:
Measurement Control
Signal Routing and Analyzer Settings
Control Settings
Measurement Parameters
Zone Definition
Map of Bursts
Trigger Settings
The most important measurement settings are also displayed in the measurement
dialog.
The measurement dialog provides all Measurement Results.
To Next Page
Loading...
