Rohde & Schwarz CMW 500 - Page 425

R&S
®
CMW 500 WiMAX Applications
WiMAX Command Reference
Operating Manual 1202.3986.32 – 03 405
Returned values
<Reliability>, Reliability indicator
<Frequency Error> Range: –999.9 Hz to + 999.9 Hz
Def. unit: Hz
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:WIMax:MEAS<i>:MEValuation:BPOWer:CURRent?
FETCh:WIMax:MEAS<i>:MEValuation:BPOWer:AVERage?
FETCh:WIMax:MEAS<i>:MEValuation:BPOWer:MAXimum?
FETCh:WIMax:MEAS<i>:MEValuation:BPOWer:MINimum?
READ:WIMax:MEAS<i>:MEValuation:BPOWer:CURRent?
READ:WIMax:MEAS<i>:MEValuation:BPOWer:AVERage?
READ:WIMax:MEAS<i>:MEValuation:BPOWer:MAXimum?
READ:WIMax:MEAS<i>:MEValuation:BPOWer:MINimum?
Returns the average burst power; see Table of Results. The current, average,
maximum and minimum values can be retrieved.
Returned values
<Reliability>, Reliability indicator
<Burst Power> Range: –100.0 dBm to +57.0 dBm
Def. unit: dBm
Characteristics Firmware version V1.00
SCPI: Query only
For additional information concerning syntax elements and returned values refer to
Multi Evaluation Measurement Commands.
FETCh:WIMax:MEAS<i>:MEValuation:CFACtor:CURRent?
FETCh:WIMax:MEAS<i>:MEValuation:CFACtor:AVERage?
FETCh:WIMax:MEAS<i>:MEValuation:CFACtor:MAXimum?
FETCh:WIMax:MEAS<i>:MEValuation:CFACtor:MINimum?
READ:WIMax:MEAS<i>:MEValuation:CFACtor:CURRent?
READ:WIMax:MEAS<i>:MEValuation:CFACtor:AVERage?
READ:WIMax:MEAS<i>:MEValuation:CFACtor:MAXimum?
READ:WIMax:MEAS<i>:MEValuation:CFACtor:MINimum?
Returns the crest factor, i.e. the ratio of the peak power in the burst to the average
burst power in dB; see Table of Results. The current, average, maximum and minimum
values can be retrieved.
深圳德标仪器 135-1095-0799