Basic Instrument Functions
R&S
®
CMW500
87User Manual 1173.9463.02 ─ 02
Fig. 5-4: Save/Recall dialog
The "Save/Recall" dialog provides the following control softkeys and hotkeys.
Save / Partial Save
Saves the current configuration (or a part of it) to a file. Save files are stored in a default
directory on drive D: of the internal hard disk.
●
If a folder is selected, a new save file SaveFile<no>.dfl is created. <no> is 000 or the
number of the last save file plus one.
●
If a save file is selected, this file is overwritten.
"Partial Save" opens a dialog for selection of the information to be saved. For a description
of selectable parts see Show content.
SCPI command:
MMEMory:SAV
Recall / Partial Recall
Recalls the selected save file (or a part of it) and activates the stored settings.
"Partial Recall" opens a dialog for selection of the information to be recalled. For a
description of selectable parts see Show content.
SCPI command:
MMEMory:RCL
Utility Dialogs
To Next Page
Loading...
