Software and Firmware Update
R&S
®
DDF205
70Getting Started 4073.0187.02 ─ 03
Address conflict
The IP address should NOT be set to "192.168.255. 252/253/254/255". This
IP address is already occupied for internal use.
After a successful change of the IP address, a dialog (shown below) with the option
to update the program (firmware) code appears.
Selecting "No" will reset the R&S DDF205, such that the new IP address will take
effect.
Selecting "Yes"
will continue with the update of program (firmware) code as defined
in the configuration file. Refer to chapter 4.3, "Receiver Firmware Update for
DDF205 without front control panel", on page 58 for details.
Changing the IP Address
To Next Page
Loading...