Software and Firmware Update
R&S
®
EB510
43Getting Started 4091.7338.02 ─ 01
After the console window has closed, the USB flash drive can be removed. It now
contains the updated installation file.
4.2.2 Update Procedure
Power off the R&S EB510, plug-in the USB flash drive into the USB port on the
R&S EB510 front-panel and restart.
Wait for the R&S logo to appear and press ESC to go into the boot menu. In the
boot-up screen that follows, use the arrow keys on the front-panel to move to "Hard
Disk" (see screenshot below) and press ENT.
Receiver Firmware and GUI Update for EB510 with front control panel
To Next Page
Loading...
