R&S ESCI Setting Parameters
1166.6004.12 3.27 E-1
b) Opening a data entry
window
c) Opening a selection
table
If a table entry consists of an (alpha-) numeric value, the
corresponding entry window will be opened after selecting the
numeric value by pressing the ENTER key or the spinwheel.
Note 1: For numeric instrument parameters, the editing
operation may be started by entering any number
or letter on the front panel or on the external
keyboard. In this case, the data entry window is
opened automatically.
Note 2: For alphanumeric table fields for which the help line
editor version 2 is required, the help line editor will
be opened by pressing the CURSOR DOWN key
after ENTER.
If a table entry may have various states (e.g., colors from a
color pallet, fixed filter bandwidths, etc.), a table indicating all
possible states is displayed with selection. The current state is
and marked by a checkmark and by the cursor.
! Set the cursor to the desired setting.
! Press one of the unit keys.
The setting is switched on and marked (√). The selection
table closes and the value is transferred to the original
table. The cursor is positioned automatically on the next
table element.
Abortion of entry ! Press the ESC key.
The current entry/selection is aborted and the original setting
is restored.
Scrolling
Some tables contain more entries than can be displayed on one
screen page. In this case, a
scrollbar is displayed at the right
margin of the table, whose slider shows the current position in the
text.
! Actuate the PAGE UP or PAGE DOWN softkeys.
The table is paged forward or back by one page.
! Press cursor key
or .
The table is scrolled up or down by one line.
To Next Page
Loading...
