R&S ESCI Getting Started with the Instrument
1166.6004.12 1.13 E-1
Safety Instruction for Instruments with Tiltable Feet
Warning
The feet must be fully folded in or out. Only in this way can the stability of the
instrument be guaranteed and reliable operation be ensured. With the feet out, the
total load for the feet must not exceed 500 N (own weight and additional units put
onto the instrument). These units must be secured against slipping (e.g. by locking
the feet of the unit at the top side of the enclosure).
YRMMk
When shifting the instrument with the feet out, the feet might collapse and fold in. To
avoid injuries, the instrument must therefore not be shifted with the feet out.
The instrument can be operated in any position.
Rackmounting
Important:
For rack installation, ensure that the air flow at the side-panel perforations and the air
exhaust at the rear panel are not obstructed.
The instrument may be installed in a 19" rack by using a rack adapter kit (Order No. see data sheet).
The installation instructions are part of the adapter kit.
To Next Page
Loading...
