Display R&S ESCI
1166.6004.12 4.200 E-1
CONFIG
DISPLAY
SCREEN
TITLE
ANNOTATION
ON OFF
LOGO
ON OFF
TIME+DATE
ON OFF
DEFAULT
COLORS 1
DEFAULT
COLORS 2
PREDEFINED
COLORS
TINT
SATURATION
DISPLAY
PWR SAVE
BRIGHTNESS
SELECT
OBJECT
DATA ENTRY
OPAQUE
The CONFIG DISPLAY softkey opens a submenu
allowing additional display items to be added to the
screen. In addition, the display power-save mode
(DISPLAY PWR SAVE) and the colors of the
display elements can be set here.
SCREEN
TITLE
The SCREEN TITLE softkey activates the entry of a title for the
active diagram A or B. It switches on or off a title that is already
input. The length of the title is limited to max. 20 characters.
IEC/IEEE-bus command: DISP:WIND1:TEXT 'Noise Meas'
DISP:WIND1:TEXT:STATe ON
TIME+DATE
ON OFF
The TIME+DATE ON/OFF softkey switches on or off the display of
date and time above the diagram.
IEC/IEEE-bus command: DISP:TIME OFF
LOGO
ON OFF
The LOGO ON/OFF softkey switches the Rohde & Schwarz
company logo displayed in the upper left corner of the display
screen on or off.
IEC/IEEE-bus command: DISP:LOGO ON
ANNOTATION
ON OFF
The ANNOTATION ON/OFF softkey switches the displaying of
frequency information on the screen on and off.
ON Frequency information is displayed.
OFF Frequency information is not outputted to the display. This
can be used for example to protect confidential data.
IEC/IEEE-bus command: DISP:ANN:FREQ ON
To Next Page
Loading...
