Recalling Data Sets R&S ESCI
1166.6004.12 4.242 E-1
EnteringText with the Help Line Editor
The help line editor is opened as soon as the CURSOR DOWN key is pressed on a text entry field
(File Name, Comment):
The entry range consists of two parts:
• editing line
• character selection field
Die CURSOR DOWN
key is used to move from the editing line to the character selection field.
The navigation in the character selection field is by means of the spinwheel or the cursor keys
,
,
and .
The desired characters are transferred to the editing line by pressing the spinwheel or by pressing the
ENTER key:
The fields of the last line of the character selection field have special functions:
SPACE adds a space to the editing line
<< moves the cursor in the editing line by one character towards the left
>> moves the cursor in the editing line by one character towards the right
BACK deletes the character in front of the cursor
EXIT stores the contents of the editing line and closes the help line editor
A return to the editing line is possible via the CURSOR UP
key (return from the top line of the
character selection field).
Within the editing line, navigation is also performed by means of the spinwheel or the cursor keys
and
.
Digits, decimal points and signs are directly entered into the editing line via the keys of the numeric
block provided at the front panel. With a PC keyboard connected, letters and special characters can
also be entered directly.
Editing is terminated via ENTER if the text is to be stored and via ESC if the text is to be discarded. The
help line editor will be closed in both cases.
To Next Page
Loading...
