R&S ESCI Recalling Data Sets
1166.6004.12 4.245 E-1
EDIT
PATH
The EDIT PATH softkey activates the entry of a path name for the device
configuration to be stored/to be loaded:
The desired directory is selected with the spinwheel or the CURSOR UP /
DOWN key and is confirmed by pressing the spinwheel or the ENTER key.
Subdirectories are opened by the CURSOR RIGHT
key and closed with
the CURSOR LEFT
key.
IEC/IEEE-bus command -
EDIT
COMMENT
The EDIT COMMENT softkey activates the entry of commentary concerning
the current data set. The help line editor is opened with CURSOR DOWN.
A total of 60 characters are available for this purpose.
Note:
For further information on how to enter the comment text via the front
panel of the unit, see the section ""Entering Text using the Help Line
Editor".
IEC/IEEE command: MMEM:COMM "Setup fuer GSM Messung"
To Next Page
Loading...
