Connecting a Printer R&S ESCI
1166.6004.12 1.22 E-1
DEVICE
SETUP
! Press the DEVICE SETUP softkey.
The HARDCOPY SETUP table opens and
displays the selection of output formats.
The current selection "Clipboard" is
highlighted and marked with a dot in the
option button.
! Use the cursor key
to move the
selection bar to "Printer" and press
ENTER.
Windows for selecting a printer (Name),
printing to file (Print to File) and selecting
printout orientation (Orientation) are
displayed.
! Use the cursor key to set the selection
bar to "Name" and press ENTER .
The list of available printer types appears.
! Use the cursor key
/ or the
spinwheel to move the selection bar to the
"HP DeskJet 660C" printer and press
ENTER.
The list closes and the selected printer
appears in the "Name" field.
Note:
If the desired printer is not available in the
selection list, its driver must first be
installed.
For further information, see sections
"Installation of Plug&Play Printers",
"Installation of Non-Plug&Play Printers"
and "Installation of Network Printers".
To Next Page
Loading...
