LAN Interface R&S ESCI
1166.6004.12 4.332 E-1
! Click the box in front of Disk drives if
drives of the controller are to be accessed
from the R&S FSP (e.g. to save settings or
to copy files from the controller to the R&S
FSP).
Windows XP will then map the drives of
the controller like network drives on the
R&S ESCI.
! Click the box in front of Printers if printers
connected to the controller are to be used
from the R&S ESCI.
! Do not change the other settings.
! Click the Display tab.
The configuration of the representation of
the R&S ESCI screen on the controller will
be opened.
! The size of the R&S FSP window on the
desktop of the controller can be changed
by means of the slider. The default setup
is full screen.
! Do not change the colour depth.
! Display the connection bar when in full
screen mode:
If this box is checked, a bar will appear at
the top screen margin. This bar displays
the network address of the R&S ESCI and
can be used to reduce, minimize or to
close the window.
If the box is not checked, a return from the
R&S ESCI screen to the controller desktop
in the full-screen mode is possible only if
"Disconnect" is selected in the start menu:
To Next Page
Loading...
