Calling and Changing the Menus R&S ESCI
1166.6004.12 3.12 E-1
Calling and Changing the Menus
The operation of the spectrum analyzer is menu-controlled via keys and softkeys. Various softkey
menus are displayed depending on the instrument status. The individual menus constitute the so-called
menu tree. The top menu (the root of the menu tree) is always called by means of a keystroke. Arrows
at the lower edge of the softkey area indicate whether a supplementary menu can be entered or not.
Softkeys with an arrow allow for branching into further menus (so-called submenus): The field "
" at the
lower right side of the softkey area indicates that this menu has a side menu.
The menu change keys on the front panel below the softkey area allow for switching between the main
menu and the side menus and submenus.
NEXT
The NEXT key calls the side menu.
PREV
The PREVIOUS key returns to the next higher menu.
Several menus provide for automatic change, i.e., return to the next higher
menu is caused automatically after pressing a softkey.
Selection of a submenu is always effected via a softkey.
SOFTKEY
The labeling of all softkeys which call a submenu includes a ⇓ arrow.
To Next Page
Loading...
