Setting Parameters R&S ESCI
1166.6004.12 3.14 E-1
Spinwheel and Cursor Keys
The spinwheel and the cursor keys are arranged besides the numeric keypad.
The spinwheel has various functions:
• With numeric entry, the instrument parameter is incremented (turning
clockwise) or decremented (turning counterclockwise) at a defined step
size.
• In tables, the spinwheel can be used to shift the cursor horizontally or
vertically when no entry window is open. The direction (horizontal/ vertical)
is switched over using the cursor keys.
• The spinwheel is used with the help-line editor to select the individual
letters.
• It can be used to shift markers, display lines, limit lines etc.
• Pressing the spinwheel terminates the input of parameters.
In tables, the cursor keys are used to shift the cursor between the lines and
columns of the table.
The keys
and
are used to shift the cursor inside the entry window to
reach a particular position in the string.
The keys
and
– increase or decrease the value of a parameter for numeric input .
– switch between editing line and help line editor for alphanumeric input.
To Next Page
Loading...
