Rohde & Schwarz EMI Test ReceiverESCI - Page 91

R&S ESCI Setting Parameters
1166.6004.12 3.17 E-1
4. The softkey is used to select the
parameter, the setting is made in
an (alpha)numeric data entry
window. The softkey function is
switched on. To switch off the
function, the softkey has to be
pressed again.
Example: parameter MARKER
! Press MRK key.
! Press MARKER 1 softkey.
The window for entering the marker frequency is
opened. The softkey is colored (factory set: red).
Marker 1 is switched on and the peak search is started.
MARKER 1
SPAN
MARKER 1
42.03456788 MHz
! Press MARKER 2 softkey.
The entry window for the marker frequency of marker 2
is opened. The softkey is colored (red), marker 2 is
switched on, and the MARKER 1 softkey turns green.
MARKER 2
SPAN
DELTA MARKER 2
1.746729018 GHz
MARKER 1
! Press MARKER 1 softkey again.
Marker 1 is switched off.
5. The softkey selects the parameter,
the setting is made in a selection
table.
Example: Selection of the sorting criteria of a file list
! Press FILE key.
! Press FILE MANAGER softkey.
! Press SORT MODE softkey.
A selection table is displayed. The softkey is colored
(factory-set: red). (operation see below).
SORT
MODE
by DATE/TIME
by EXTENSION
SORT MO
DE
by NAME