R&S ESCI Setting Parameters
1166.6004.12 3.23 E-1
Version 2:
The entry area consists of two parts:
! the editing line
! the character selection field
The cursor keys
or are used to toggle between entry in the editing line and the character selection
field .
Entry of text ! Select parameter.
The data entry is active automatically upon calling the data entry
window. In tables, the help line editor is accessed by the cursor key
.
In the editing line, the cursor is positioned at the beginning of the
current entry.
! Position the cursor to the character selection field using the cursor
key
.
The cursor highlights the first letter of the editor.
! Position the cursor to the character to be entered in the editing line
by means of the cursor keys
or or the spinwheel.
! Press the ENTER key or the spinwheel.
The character will be entered in the editing line.
Correcting the entry
(Version 1)
! Move to the character << in the character selection field using the
spinwheel.
! Position the cursor behind the character to be deleted by moving
and pressing the spinwheel on << and >>.
! Move to the BACK field using the spinwheel and press the
spinwheel.
The entry to the left of the cursor in the editing line will be deleted.
To Next Page
Loading...
