Common Analysis and Display Functions
R&S
®
ESW
205User Manual 1177.6298.02 ─ 08
Example:
(Note that this example is based on data recorded in the Spectrum application. The
basic principle of a spectrogram in the Receiver application is the same.)
In this example, you see the spectrogram for the calibration signal of the R&S ESW,
compared to the standard spectrum display. Since the signal does not change over
time, the color of the frequency levels does not change over time, i.e. vertically. The
legend above the spectrogram display describes the power levels the colors represent.
Result display
The spectrogram result can consist of the following elements:
Trace Configuration
To Next Page
Loading...
